|
> Surface cannot be extremely cold or extremely hot to apply decals (above 40°)
> Clean surface with a cleaning solution or rubbing alcohol
> Let surface dry thoroughly
> Apply tape along side or top edge of masked decal to make a hinge
> Flip masked decal over by using the hinge
> Keep decal flat against the surface while peeling off the backing shee to expose the adhesive
> Hold edge of premask close to surface while using a credit card or driver's license to squeegee the decal onto the surface
> Once the decal is completely wiped down, peel the masking away from the decal
> Keep masking flat against surface while peeling
> Avoid using pressure washers, wipers, scrapers directly on decal
REMOVAL: peel decal off and wipe surface with rubbing alcohol to remove any adhesive
|
